Office Doña Manuela Pastor Subd. Brgy Gulod Labac Batangas City, Batangas Phil.
Tel. :0912-231-2417 / 0933-280-2079
E-Mail: jdmhelpdesk@yahoo.com / joewell_delmundo@yahoo.com
VAT Reg. TIN 174-053-786-000




CONTENTS


 INTRODUCTION
 ORGANIZATIONAL CHART
 LIST OF KEY PERSONNEL
 LOCATION MAP
 WORK SHOP REPAIR AND MAINTENANCE SERVICES
 SERVICES PROVIDED
 EQUIPMENT AND FACILITIES
 QUALITY MANAGEMENT SYSTEM
 HEALTH POLICY
 QUALITY POLICY
 SAFETY POLICY
 ENVIRONMENTAL POLICY
 FINISHED PROJECTS AND CONTRACTS
 MAJOR OF CLIENTS

 ATTACHMENTS:
o SSS / CERTIFICATE OF COMPLIANCE
o DTI REGISTRATION
o BUSINESS PERMIT
o BIR REGISTRATION
o DOLE REGISTRATION
o AUDITED FINANCIAL STATEMENTS


INTRODUCTION


JDM MARINE INDUSTRIAL SERVICES is a wholly-owned Filipino company duly registered that was emboldened by the strong desire to serve others and the vision to belong with the group of active participants in moving the country towards economic progress, which was organized in November 23, 2007 by a small group of seasoned and highly experienced professional and technicians in the various discipline of mechanical, electronics, electrical and most especially in marine and industrial engineering. The company’s strength is in line with machinery, maintenance, turn-around, repair, overhauling, modification, fabrication, troubleshooting and capability to do various specialized works.

Our expertise, experience and affiliations both local will prove to be beneficial in terms of providing quality service and cost effectiveness. Our well-trained and experienced human resources are one of our major strengths maintaining high levels of quality and safety.

This proposals aims to provide a concise description of JDM’s capabilities and set up to perform construction, repair and maintenance work for the costumer’s consideration.



ORGANIZATIONAL CHART

































i




LIST OF KEY PERSONNEL


NAMES POSITION CONTACT NO.
Engr. Joewell F. Del Mundo General Manager 0933-280- 2079
Operations Manager
Medy Del Undo Admin / Finance Manager +63919-8329034
Antonio Laderas Workshop Supervisor (Static) +63928-7536734
Rosshell Madlangbayan Accounts +63921-3537516
JOewell M. Del Mundo Jr. Sales Engineer
Estelita Marasigan Admin / Workshop / Sales Coordinator
Mariane Del Undo Secretary



















WORKSHOP REPAIR AND MAINTENANCE SERVICES
All other repair that require full out and repair in our service center located in Dona Manuela Pastor Subd. Brgy Gulod Labac Batangas City, Batangas Phil . Transport, Handling, Packaging and Insurance of all items is included in our scope of supply. Detailed repair scope will be submitted for review and approval of this end user. Workshop on site inspection of end user or third party will be at costumer cost.
1. Machining works.
2. Metalizing.
3. Fabrication of parts and other components.
4. Welding works SMAW, GTAW, MIG, GAS welding and thermal spray
5. Overhauling of engine, pumps, gearboxes, compressors, turbines and generator.
6. Re-facing and re-boring.
7. Reconditioning and repair of pumps intake and exhaust valve, T/C casing cylinder and piston.
8. Motor rewinding and overhauling of generator.
9. Equipment / spare parts modification and conversion.
10. Belzona and polymeric coating and re-building.
11. Bearing replacement and re-babbiting.
12. Hot and cold insulation, cladding and ducting.
13A. Dynamic balancing.
14. Engine re-building.
15. Preventive and routine maintenance services.

SERVICES PROVIDED

1. Constructions of engineering projects varying from civil, electrical, mechanical , factory automation and field instrumentation .
2. Blinding and re-blinding work for all type of equipment.
3. Full-out and re-installation of pump turbine motor, gear boxes, fans, compressor and other rotating and reciprocating or stationary equipment.
4. Field replacement of bearing, mechanical seal, packing for pump, motor fans, and related rotating machinery and accessories.
5. On-site alignment checks / uncouple / couple of all types of rotating machinery.
6. Field overhaul, repair, replacement of parts, packing set, piston ring, etc. of reciprocating valve unloaded system and their related accessories.
7. Field trouble shooting and commissioning services.
8. Fin fan cooler blade angle check and adjustment and drive belt adjustment or replacement.
9. Field dynamic balancing of blower and other related machinery.
10. Field installation and commissioning of new equipment skids.
11. Heat ventilation and air-conditioning.
12. Field trouble shooting of all electronics machinery.
13. Sand blasting works
14. Supply of heavy equipment



EQUIPMENT & FACILITIES

SHOP MACHINES
• Universal Lathe Machine
• Turret Milling Machine
• Pedestal Grinder
• Heat Treatment Oven
• Welding Generator


WELDING MACHINES

• AC/DC Shielded Metal Arc Welding
• Gas Tungsten Arc Welding
• TIG Welding
• Gas Metal Arc Welding
• Oxy-Acetylene Gas Welders
• Thermal Spray Welding









QUALITY MANAGEMENT SYSTEM

Our quality management system will be based on a systematic, logical and simple structure through proper training, to develop quality culture that will determine the individual attitude towards quality within organization.

Focal points within the organization to manage quality will be trained to enhance existing quality management practices and to disseminate the implement continuous improvement with specific concern towards relative cost.

Improvement of our staff to identify and take necessary action towards the improvement of quality or cost savings will be encouraged, but will be subjected to direct and immediate discussions with the people responsible for quality control.












HEALTH POLICY

JDM MARINE INDUSTRIAL SERVICES provides our services staff health insurance including accident insurance. We vigorously promote health and safety practices through the use of training and policy guidelines and safety equipment.

Although the nature of our work involves, minimal health hazard, we create awareness through briefing and written guidelines.

All services staff will have annual medical examination to ensure the health and well-being of our staff.

Health and Safety bulletin will be issued on a regular basis from health and safety organization to continuously promote awareness and good practices. First aid kit is providing for emergencies within the facilities. Emergency contact number is also posted for such emergencies.

JDM MARINE INDUSTRIAL SERVICES is committed to provide necessary equipment to promote health in the working area. Necessary measures are taken to minimize or eliminate noise pollution or any related health hazard that will affect and the surrounding community.






QUALITY POLICY

JDM MARINE INDUSTRIAL SERVICES is committed in providing our costumer consistently high standard of quality of our services. Experience and properly trained workforce is vital to meet the objectives which will fully support.

In the long term, we are aiming to be ISO certified and we are in the process of setting up the basis structure to meet this objective. Our quality standard will be set by our costumer and our quality policy and practice is patterned within industry standard.

Our workforce and proper equipment will be the key in producing quality
services and products. Through training, we aim to put theses practices in place so that quality can be assured and consistent.








SAFETY POLICY

JDM MARINE INDUSTRIAL SERVICES is sincerely interested in operating our workshop and service center safely and in protecting our worker and related manpower against accident and injuries.

Through safety briefing and other media, the company will strive to provide each worker the necessary information for them to perform their assignment safely, efficiently and responsibly.

It is our aim to train and instill good safely practice within our facility and on-site promoting good judgment and correct thinking towards safety.













ENVIRONMENTAL POLICY

JDM MARINE INDUSTRIAL SERVICES will provide necessary guidelines and procedures to ensure that no environmental impact will occur such as discharge of waste water or any related waste.

We have provided in our facility waste water containment in accordance to local government regulation.

Disposal of related waste will be in accordance to government regulation. We have adopted the policy to recycle all waste materials as much as possible. Proper disposal of other wastes will be managed in accordance to government regulation and will be responsibility of our service facility manager.











FINISHED PROJECTS and CONTRACTS

• PHIL-ASIA INTERPORT SERVICES CORPORATION
Ground Floor Capilitan Engineering Building, 206 Zaragosa St.,
Tondo, Manila

1. Re-install of general fire alarm # 1 bell and 3 pcs. Outlets.
2. Installations of 2 units cargo light and wiring.
3. Troubleshoot and recondition of towing motor winch and installed new winch box.
4. Conversion of 1 unit fire pump from 240 volts to 220 volts and install magnetic contractor and complete wiring.
5. Crap-out pilot control wiring and full-out to repair switch box.
6. Re-install towing winch switch box and reflanged aircon pipe line.
7. Installation of engine room starboard buzzer fixing and additional 3 pcs. Fluorescents lamps at engine room, troubleshoots fresh water pumps, troubleshoots main engine temperature of port and starboard.
8. Trouble shoot auxiliary engine #2 generator to normal condition.
9. Trouble shoots G. S. pump motor.
10. Rewinding of 50 KVA generators.







• TRANSLIFT SHIP MANAGEMENT, INC.
Madrigal Business Park, Ayala, Alabang, Muntinlupa City
Tel No. 772-8009
1. Rewinding of 2 unit ship motor (M/T Clarissa)
2. Rewinding of 3 unit 2HP motor blower (LPG Teresita)
3. Installation of steering component (Petro Helen)
4. Trouble shooting of 40 tons aircon unit (LPG Teresita)
5. Installation of anameter (M/T LPG Teresita)
6. Trouble shoot of power supply in panel board and genset 1 & 2 (M/T LPG Teresita)
7. Rewinding of 60KW transformer (M/T LPG Teresita)
8. Trouble shoot of electronic control for gear box pump (M/T LPG Teresita)
9. Trouble shoot main engine alarm (PLG Teresita)
10. Check up power and replacement of bulb light LPG Teresita
11. Trouble shoot of power supply of genset #3 LPG Teresita
12. Trouble shoot of electronic PCB board of lighting switch control
13. Repair/recon of PCB board for fire alarm system (Petro Helen)
14. Recondition of one unit SSB Radio assemble (M/T Petro Helen)
15. Overhauling of aircon compressor Bitzer Brand ( M/T Petro Anica )
16. Overhauling of Ingersoll Rand Air compressor ( M/T Petro Claire )
17. Recondition and rewinding of 10 unit motor ( M/T Petro Claire )
18. Overhauling of aircon compressor ( M/T Petro Helen )
19. Recondition of 81 KVA generator Caterpillar ( M/T Petro Claire )
20. Repair and recondition of 60 KVA genset alternator ( Petro Claire)
21. Fabrication of S.W Pipe for F.W cooler ( M/T Petro Cara )

22. Trouble shooting and recondition of AIRE type circuit breaker
system. ( M/T Petro Celine ).
23. Trouble shoot of auxiliary engine No.1 & 3 control panel unit
( M/T Petro Celine )
24. Trouble shoot of steam tank control panel ( M/T Petro Celine )
25. Trouble shooting of governor motor of No.1 D/G Engine
( LPG Teresita ).
26. Trouble shooting alarm of emergency generator ( LPG Teresita )
27. Troubleshoot of monitor fire alarm system (Petro Celine)

• KIEPCO PHILIPPINES/ KPS ENGINEERING SERVICES
1. Rewinding of Submersible pump
2. Overhauling of Aircon compressor ( Copeland 4DK3-2500 )

• ACG EXPRESS LINE
1. Trouble shoot of duckpeller controller
2. Trouble shooting of JRC Ratster scan radar power failure
3. TOAPA amplifier

• GRAND ASIAN SHIPPING LINE
1. Supply of AVR brushless style
(M/V Devora Dos, M/V Devora Uno,)
2. Trouble shooting of steering motor

• GBB SHIPPING CORP.
1. Fabrication of pipe line
2. Installation of heater
3. Trouble shooting fire alarm system
4. Construction and renovation of Ship facilities (crew’s room, cabinet, ceiling and dinning room.

• HERMA SHIPYARD
1. Overhauling two units generator set of Petrotrade Uno

• FOSCON SHIPMANAGEMENT INC.

1. Installed 150A Gate Valve for:
a. Deck line valves, additional for drop lines COT. No. 2, two pieces including adjustment of existing valve.
b. Deck line valves, additional for drop lines COT. No. 4, two pieces including adjustment of existing valve.
2. 2. Installed one 250A Gate Valve for mainline deck valve TANK no. 2.

3. Installed one 250A Gate Valve for mainline deck valve TANK no. 3.

4. Installed one piece 250A Gate Valve for mainline deck valve TANK no.4.

5. Installed the three 350A Gate Valve at Cot. No.3.

6. Installed the 300A gate valve at pump room area.

7. Fabrication of marking IMO at stern.

8. Fabrication of spindle connecting valve.

9. Fabrication of universal joint.


10. Installation of three shafting rod valve connection at three valves
a. inside Cot No.3.

11. Installation of valve handles at upper deck area connecting the shafting
a. rod.
12. Installation of funnel screen .

13. Fabrication of 150A pipe for deck stand pipe.

14. 14 .Installation of pipe support.

15. Fabrication of valve handles at upper deck area.

16. Fabrication of funnel screen.

17. Fabrication and installation of three shafting rod valve connection.

18. Troubleshooting, repair and reconditioning of accommodation aircon.

19. Troubleshooting of 100V feeder control panel alarm.

20. Cargo Derrick Gear / Bearing Pedestal No.1

21. Safety Devices and Controls

22. Life Boat Engine

23. 36tons Motorized Crane, telescopic type with 130ft boom length

24. Retorquing of Loosen Lock Nut / Pin of Derrick Boom No. 2

25. Troubleshooting of 100V Feeder Control Panel Alarm

26. Reconditioning of Accommodation Aircon

• Stepan Phil. Inc.

CAIP, Bauan, Batangas
1. Replacement of Pellow Block and Alignment Of Motor.
2. Replacement OF Bearing and Alignment Of Motor.
3. Replacement of Bearing.
4. Replacement of Bearing, Re-installed and Alignment of Motor.
5. Replacement of Bearing, Hauling of unit and Alignment of Motor.
6. Complete repair / rewind of motor 220V supply
7. Rewinding of one unit Submersible Pump 3.7 kwt ( two poles- RPM 3450 )

• LIMA UTITLITIES CORPORATION
2nd Floor Lima City Hotel, Malvar Batangas
Tel No: (043) 981-3202
1. Supply and Replace of Material of Yanmar Engine.
2. Check up, Repair, and Supply of material for Engine (Perkins)
3. Reconditioning of 3-unit pole mounted transformer.
4. General cleaning of split type aircon.
• Pontefino Hotel
Gulod Labac Batangas City
Tel No: 723-3488
1. Rewinding of 1 unit mixer motor
2. Repair and rewinding of submersible pump.
3. Rewind and Repair of Blower
4. Rewinding of 4KW Power Induction Motor.

• Matson
Calaca Batangas
1. Rental of heavy equipment 3.5T Forklift.
2. Rental of heavy equipment Compactor Roller.
3. Rental of the 45Tons Telescopic Crane.
4. Rental of 3.5Tons Forklift.
• SIDC Feed Mills
Soro-Soro Kalsada Batangas City
1. Repair of hydraulic shaft and tierod.
2. Machining of 2pcs. Hydraulic Pump Adaptor.
• Armor Feeds
Padre Garcia Batangas
1. Rewinding of 2 units Geared Motor
2. Rewinding of one unit 5hp WEG Motor
• Limcoma
1, FABRICATION OF CONVEYOR PLATE (DOSING CONVEYOR)
2, Press In and Press Out of Rolers ( Dimple and Groove)
• PETRON DEPO / Y2S ENG’G & CONSTRACTION
Mabini Batangas
1. Reconditioning Gate Valve 2 unit
2. Rewinding of 5 hp motor
3. Recondation 1 unit jockey pump for fire pump.

• Republic Cement Corporation
Mapulo. Taysan Batangas
1. Rewinding of ½ hp compressor fan motor
2. Rewinding of 7.5 kw blower motor, bulk loading silo.
3. Rewinding of 1 hp, 1.3 hp motor and 4 kw motor
4. Rewinding of 9 kw motor
5. Rewinding of hydraulic motor,1.5 1405 rpm
6. Recondition of 2 unit kw motor
7. Rewinding of 15 hp motor
8. Rewinding of 2.6 kw Air slide blower motor,1 hp condenser motor, ½ hp motor for koppel aircon, 2.2 kw blower motor
9. Rewinding 2.2 kw induction motor.
10.Recondation And Replacement of Split Ring OF 40 kw Dc motor.
11,Rewinding of 36 kw motor
12, rewinding of 2 unit of 11 kw motor
13, rewinding of 50 hp motor.
Product

Solidifier Component
Appearance Paste
Color Light gray
Gel strength
at 77°F (25°C) > 70 g/cm QV
Density 1.63 - 1.69 g/cm3
1. PRODUCT NAME BELZONA® 1111
(Super Metal)
Engineering grade repair system for repairing and rebuilding machinery and equipment.
4. TECHNICAL DATA
Base Component Appearance Color
Gel strength at 77°F (25°C) Density

2. MANUFACTURER Belzoila Inc.,
America's Gateway Park, 2000 N.w. 88th Court Miami, Florida 33172 Belzona Polymerics Ltd. Claro Road,
Harrogate, North Yorkshire HG1 4AY, England.


5. PHYSICAL/MECHANICAL
PROPERTIES
Determined after 7 days cure at 77"F (25°C). Post curing the material with heat results in a more highly cross-linked polymer.
For enhanced performance this material may be post-cured by heating to 212"F (100°C) for a period of up to 24 hours.




3. PRODUCT DESCRIPTION
A two component paste grade system based on a silicon steel alloy blended
with high molecular weight reactive polymers and oligomers. When cured, the material is durable yet fully machinable. '
Applications
Shafts
Hydraulic rams
Bearing housings
Keyways
Engine blocks
Casings
Pipes
Tanks
Flange faces










Belzona

CURE TIMES TEMPERATURE
41°F (5°C) 50°F (10°C) 59°F (15°C) 68°F (20°C) 77°F (25°C) 8&F (30°C)
Movement or use involving
no loading or immersion 4 hrs 3 hrs 21/4 hrs 13/4 hrs 1 hr 3/4 hr
Machining and/or light loading 6 hrs 4 hrs 3 hrs 2 hrs 11/2 hrs 1 hr
Full electrical, mechanical or
thermal loading 4 days 2 days 11/2 day 1 day 20 hrs 16 hrs
Immersion in chemicals 5 days 4 days 3 days 2 days 11/2 days 1 day

The Multi-Purpose , Machinalabe Belzona ,System for Repairing and Rebuilding:

Belzona" 1111 (Super Metal) is a two component repair and rebuilding material based on a ceramic steel reinforced polymer system. It has been acclaimed for many years as providing quality solutions to a wide range of general engineering needs. Applications for Belzona" 1111 (Super Metal) include the repair and reclamation of:
• oversized bearing/bush housings
• fractured and holed castings
• distorted flange faces
• leaking tanks
• scored hydraulic rams
• sloppy keyways
• scored machine beds
• fractured pipes
• undersized/scored shafts stripped threads

Belzona" 1111 (Super Metal) requires no special tools or skills to apply. It will bond to almost any surface, and can be machined using conventional tools. Belzona" 1111 (Super Metal) will not corrode, and is extremely resistant to a wide range of chemicals.
Belzona" 1111 (Super Metal) will allow you to:
• Simplify routine maintenance
• Reduce the need for spare parts
• Slash "down time"













REBUILD WORN SHAFTS REPAIR CORRODED PIPES




RESEAT LOOSE BEARINGS




REPAIR CRACKED CASINGS




REFORM DAMAGED SHAFTS








STA-RITE PUMPS
Sewage
• SC4 Series | Sewage Pumps, Cast Iron, 4/10 HP, 115V, 2" NPT Discharge
• SC5 Series | Sewage Pumps, Cast Iron, 1/2 HP, 115V, 2" NPT Discharge
• SC6 Series | Continuous Duty Sewage Pumps, Cast Iron, 1/2 HP, 115V, 2" NPT Discharge
• SC7 Series | Sewage Pumps, Cast Iron, 1/2 HP or 3/4 HP, 2" NPT Discharge, 2" Solids Handling
• SCC7 Series | Sewage Pump, Cast Iron, 1/2 HP or 3/4 HP, 2" NPT Discharge, 2" Solids Handling
• SC9 Series | Sewage Pump, Cast Iron, 1 HP thru 2 HP, 2" NPT Discharge, 2" Solids Handling
• SCC9 Series | Sewage Pump, Cast Iron, 3" NPT Discharge, 2" Solids Handling
• SP440120T | Pre-Plumbed Sewage System, 4/10 HP, 115V, 2" NPT Discharge
• SP550120T | Pre-Plumbed Sewage System, 1/2 HP, 115V, 2" NPT Discharge


Sump
• P133 & PC133 Series | Sump Pump, 1/3 HP Pedestal
• D125/D133/D150 Series | Sump Pump 1/4 - 1/2HP Thermoplastic, 1-1/4", 1-1/2" NPT Discharge
• DC233 Series | Sump Pumps, 1/3 HP, Cast Iron, 1-1/2" NPT discharge
• DC250 Series | Sump Pump, 1/2 HP, Cast Iron, 1-1/2" NPT discharge
• Trident D175 Series | Sump Pump 3/4 HP Thermoplastic, T Check Valve & Universal Adapter
• DP233110V | Pre-Plumbed Sink Pump System, 1/3 HP

Battery Back-Up Sump
• DB100 | Battery Back-Up Sump Pump, 30 GPM
• DB200 | Battery Back-Up Sump Pump, 47 GPM


Effluent
• ST.E.P. Plus D-Series | 4" Multi-Stage Submersible Effluent Pump, Stainless Steel, 10-30 GPM
• EC2 Series | Effluent Pump, Cast Iron, 4/10 HP, 115V, 1-1/2" NPT Discharge
• EC3 Series | Effluent Pump, Cast Iron, 1/3 HP, 1-1/2" NPT Discharge
• EC4 Series | Effluent Pump, Cast Iron, 4/10 HP, 2" NPT Discharge
• EC6 Series | Effluent Pump, Cast Iron, 1/2 HP, 3/4" Solids Handling, 2" NPT Discharge
• EC7 Series | Effluent Pump, Cast Iron, 1/2HP - 1HP, 3/4" Solids Handling, 2" NPT Discharge
• EH7 Series | High Head Effluent Pump, Cast Iron, 1/2 HP and 1HP, 3/4" Solids Handling, 2" NPT Discharge
• EC9 Series | Effluent Pump, Cast Iron, 2 HP, 230V, Manual Switch, 3/4" Solids Handling, 2" NPT Discharge
• ST.E.P. Plus Series | High-Head Filtered Effluent Pumps, Stainless Steel, 10 - 50 GPM


High-Temperature Effluent
• HT33 & HTX3 Series | High-Temperature Effluent Pump 1/3 HP, Cast Iron Tethered Switch, 1-1/2" NPT Discharge
• HT7 Series | High-Temperature Effluent Pump, Cast Iron, 1/2 HP, 115V, Tethered Switch, 3/4" Solids Handling, 2" NPT Discharge


Grinder

• SG11 Series | Grinder Pumps, 2 HP 230V


4" Submersible
• HS+ Series | 4" Submersible, Stainless Steel, 1/2 thru 1 HP, 3-Wire, 5-20 GPM, 1-1/4" NPT discharge
• HS Series - 5 & 7 GPM Trimline | TrimLine 4" Submersibles, Stainless Steel, 1/2 thru 1-1/2 HP, 2- and 3-Wire, 5-7 GPM
• HS Series - 10 thru 50 GPM | 4" Submersible, Stainless Steel, 1/2 thru 10 HP, 2- & 3-wire
• J Series 5 & 7 GPM Trimline | Trimline 4" Submersible, Composite Materials, 1/2 thru 1-1/2 HP, 2- and 3-Wire, 5 & 7 GPM, 1-1/4" discharge
• J Series, 10 thru 30 GPM | 4" Submersibles, Composite Materials, 1/2 thru 1-1/2 HP, 2- and 3-Wire, 10 - 30 GPM, 1-1/4" discharge
• 70 GPM Series | 4" Submersible Liquid End Only, Cast Iron, 70 GPM, 1-1/2 HP thru 10 HP, 2 or 3-Wire
• L90 Series | 4" Submersible High-Flo Liquid End Only, Stainless Steel, 90 GPM, 2 thru HP, 2- and 3-Wire



6" Submersible
• L6TS70 Series | 6" Submersible, 70 GPM, 1 thru 25 HP, 3" Discharge
• L6TS115 Series | 6" Submersible, 115 GPM, 2 thru 40 HP, 3" discharge
• L6TS140 Series | 6" Submersible, 140 GPM, 3 thru 50 HP, 3" discharge
• L6TS155 Series | 6" Submersible, 155 GPM, 3 thru 60 HP, 3" discharge
• L6TS230 Series | 6" Submersible, 230 GPM, 3 thru 60 HP, 4" discharge
• L6TS300 Series | 6" Submersible, 300 GPM, 5 thru 60 HP, 4" discharge
Jet
• CJ Series | Shallow Well Jet Pump, Stainless Steel, 1 to 1-1/2 HP, 115V/230V, 30-50 Switch, 1-1/4" Suction, 1" Discharge
• HN Series | Shallow Well Jet Pump, Cast Iron, 1/2 thru 1 HP, 115V/230V, 30-50 Switch, 1-1/4" Suction, 1" Discharge
• SN Series | Shallow Well Jet Pump, Cast Iron, 1/2 thru 1-1/2 HP, 115V/230V, 30-50 Switch, 1-1/4" Suction, 1" Discharge
• FN Series | Shallow Well Jet Pump, Cast Iron, 1/2 or 3/4 HP, 115V/230V, 30-50 Switch, 1-1/4" Suction, 1" Discharge
• PN Series | Shallow Well Jet Pump, Thermoplastic, 1/2 to 1 HP, 115V/230V, 30-50 Switch, 1-1/4" Suction, 1" Discharge
• HL Series | Convertible Jet Pump, Cast Iron, 1/2, 3/4, and 1 HP, 115V/230V, 1-1/4" Suction, 1" Drive, 1" Discharge
• SL Series | Convertible Jet Pump, Cast Iron, 1/2 thru 1-1/2 HP, 115V/230V, 1-1/4" Suction, 1" Drive, 1" Discharge
• FL Series | Convertible Jet Pump, Cast Iron, 1/2 & 3/4 HP, 115V/230V, 1-1/4" Suction, 1" Drive, 1" Discharge
• PL Series | Convertible Deep Well Jet Pump, Thermoplastic, 1/2 thru 1-1-/2 HP, 115V/230V, 1-1/4" Suction, 1" Drive, 1" Discharge
• HMS Series | Horizontal Multi-Stage Jet/Centrifugal, Cast Iron, 3/4 thru 1-1/2 HP
• MS Series | Vertical Multi-Stage Deep Well Jet, Cast Iron, 3/4 thru 2 HP
• SSJ Series | Vertical Single-Stage Deep Well Jet, Cast Iron, 1/2 thru 1 HP
Centrifugal
• DSS4HG Series | Pro Storm High Head Centrifugal Pumps, 2 HP, 57 GPM, 1-1/2" Suction, 1-1/4" Discharge
• DS3 Series | Medium Head Centrifugal Pumps, 1 thru 2.5 HP
• PD Series | Medium Head Centrifugal Pumps 1 thru 2.5 HP, 115V/230V, 2" Suction
• D Series - High Head | High Head Centrifugal Pumps 1 thru 5 HP, 115V/230V
• D Series - Medium Head | Medium Head Centrifugal Pumps, 2 thru 5 HP, 115v/230V
• CC Series -- High Head | High Head Straight Centrifugal Pump, 3 & 5 HP, 230V or 460v, 1- or 3- Phase, 2-1/2" Suction, 2" Discharge
• CC Series - Medium Head | Medium Head Straight Centrifugal Pumps, 3 HP, 165 GPM, 230V or 460v, 1- or 3- Phase, 2-1/2" Suction, 2" Discharge
• DPC | Medium Head Centrifugal Pump, 1/2 HP, 43 GPM, 115V, 1 Phase, 1-1/4" Suction & Discharge
• J / JB Series -- High Head | High Head Centrifugal Pumps, 1/3 to 2-1/2 HP, 1- or 3-Phase
• J / JB Series -- Medium Head | Medium Head Centrifugal Pumps, 1/3 thru 2-1/2 HP, 1- or 3-phase
• EDP55RV | Composite Engine-Driven Self-Priming Pump, 5-1/2 HP, 2" NPT Suction & Discharge
• EEDD, EDDH, and EEDDH | Engine-Driven Self-Priming Pumps, 2" Suction & Discharge


High-Pressure Booster
• HP Series | High-Pressure Boosters, Cast Iron, 1/2 thru 3 HP, 7 thru 30 GPM
• HPS Series | High-Pressure Booster, Stainless Steel, 1/2 thru 3 HP, 7 thru 30GPM


Tanks
• PSP Series | PRO-Source Plus Premium Steel Pressure Tanks, 19 thru 119 Gal Max Capacities
• PS Series | PRO-Source Steel Pressure Tanks, 2 thru 119 Gal Max Capacity
• PSC Series | PRO-Source Composite Fibrewound Pressure Tanks, 14 thru 119 Gal Max Capacity
• AW Series | PRO-Source Steel EpoxyLined Air-Over-Water Tanks, 30 thru 120 Gal Max Capacity
• FCT Series | PRO-Source Composite Fibrewound Contact Tanks, 40 thru 120 Gal Max Capacity
• SP Series | PRO-Source SidePort Composite Fibrewound Contact Tanks, 30 264 Gal Max Capacity

























LIST OF MAJOR CLIENTS

• PHIL-ASIA INTERPORT SERVICES CORPORATION
Ground Floor Capilitan Engineering Building, 206 Zaragosa St., Tondo Manila
Tel No. (02) 245-1578 / +63918-329-6342
Mr. Edwin Boiles

• TRANSLIFT SHIP MANAGEMENT
Madrigal Business Park, Ayala, Alabang, Muntinlupa City
Tel No. 772-8009
Chief Bernie Pitugo
Engr. Manager



• KIEPCO PHILIPPINES
8741 Paseo De Roxas Makati City, 1227 Phils.
Tel No. (02) 848-0231-35
Mr. Medwin Austria
Procurement Officer

• KPS ENGINEERING SERVICES
Brgy.Ilijan Batangas
Tel No.(043) 300-3333
Mr. Romart Macaraig
Purchasing Dept.


• GRAND ASIAN SHIPPING LINE
Suite 306 Vomventure Plaza Ortigas Avenue Greenhills, San Juan Metro Manila
Tel No. 726-5257
Joel Acong

• GBB SHIPPING CORPORATION
Unit 15 Legaspi Tower Roxas Blvd. Corvito Cruz Malate Manila
Tel No. (632) 525-6090 / 536-3146 / Fax No. (632) 525-6113
Mobile No. / +63918-907-8777
Capt. Bu Young Ho
President



• HERMA SHIPYARD
Herma Building, 94 Sct., Rallos Street Kamuning, Quezon City, Philippines
Tel No. (632) 922-3421
Mobile No. +63917-834-5274
Mr. Allan Ferdinand C. Larios
Marketing Officer

• FOSCON SHIPMANAGEMENT INC.
465 Muralla Cor. Real St., Intramuros, Manila 1002 Philippines
Tel. No. (632) 525-7323 / 521- 0217
Mr. Chong Pal Kim
Director
• STEPAN PHIL. INC.
CAIP, Bauan, Batangas
Tel. No. (043) 727-2828
Ms. Colet C. Alarca
Purchasing Team Leader

• LIMA UTILITIES CORPORATION
2nd Floor Lima City Hotel, Malvar Batangas
ESIDRO PLATON
Purchasing Dept.
Tel No. (043) 981-3202


• PONTEFINO HOTEL
Gulod Labac Batangas City
Tel No.:723-3488
Mr. Carlo Christopher Y. Glindo
Purchasing Personnel

• MATSON
Cainta Rizal
Tel No. 240-3231 / 240-0667
Engr. Jess Matias
General Manager




• SIDC FEED MILLS
Soro-Soro Kalsada Batangas City
Mobile No. +63928-290-5137
Engr. Roy Ardid
SIDC-Plant Engineer

• ARMOR FEEDS
Padre Garcia Batangas
Tel No. (043) 515-9622 / 515-9772
Mr. Tony Ballesteros
Maintenance Engineer
• LIMCOMA FEEDS MILL
Lipa City
Ricson Pintor
• PETRON DEPO / Y2S ENG’G & CONSTRACTION
Ynes Street, Mira Monte Subdivision Lucban, Quezom
Mobile No. +63917-240-3381 / Tel No.(042) 540-4687
Mr. Jason Sta. Maria

• Republic Cement Corporation / LAFARGE
Mapulo,Taysan Batangas
Noel Ballaran
Division Manager